24V To 12V chargers are used for charging 12V auxiliary batteries from the main battery of a 24V vehicle. They vary in capacity and technology to suit different battery and chemistry capacities.
The REC2412-20NG and REC2412-30NG joins our new NG series of units that uses the next generation topology
reducing the size and increasing the output power compared to its previous products, while still providing all the
features of a Reducer, Charger and Equalizer all contained in an extremely compact (373cm³ in volume), weather,
dust and vibration resistant package.
Features Include:
• Extremely compact unit: just 160mm X 70mm X 30mm – fits in small places
• Fully encapsulated: enhanced resistance to vibration and humidity
• Extremely high efficiency: typically 95% - cooler operation and longer life
• Extremely low standby drain: below 0.005A
• Versatile modes: selectable as multi stage charger, equalizer or dual fixed voltage reducer
• Multi chemistry charger: selectable for sealed LA, vented LA (60AH-300AH) or Lithium
batteries(40AH to 300AH)
• Built-in automatic current limit, over temperature and over voltage protections
• Remote status led indicator for easy visibility
For More Information:
• Refer to Leaflet or feel free to contact us
Installation Sheet
|
Product |
REC-2412-20NG |
REC-2412-30NG |
|
Input Voltage |
23 to 30VDC |
23 to 30VDC |
|
Output Voltage Absorption/Float |
13.5V ± 1% VLA/SLA 13.8V ± 1% Li |
13.5V ± 1% VLA / SLA 13.8V
± 1% Li |
|
Output Voltage Absorption |
14.5V ± 1% VLA 14.2V ± 1% SLA 14.8V
± 1% Li |
14.5V ± 1% VLA 14.2V ± 1% SLA 14.8V ± 1% Li |
|
Efficiency |
Approx 95% |
Approx. 95% |
|
Bulk Charge Current |
20 Amps |
30 Amps |
|
Stand by Current |
5mA ± 5% |
5mA ± 5% |
|
Protection |
Over Current, Over Voltage and Thermal Protection |
|
|
Input and Charge Status Indication |
Yes |
Yes |
|
Output Connections |
Fly Leads |
Fly Leads |
|
Dimensions mm (LxWxH) |
162 x 71 x 32 mm |
162 x 71 x 32 mm |
|
Weight |
560g |
560g |
Design and specifications may change without notice.
24V To 12VDC Switchmode Battery Chargers
Features Include:
• Microprocessor based, 3 stage fast charge
• High efficiency switchmode technology
• High reliability and longer battery life
• Control wire with delayed reaction to avoid cold cranking problems
• Battery detection avoids connection reversal and sparking problems
• Timeout on bulk charge to avoid battery over charge
• Current limiting under overload and short circuit conditions
• Compact and lightweight aluminium heatsink construction
For More Information:
• Refer to Leaflet or feel free to contact us
Installation Sheet
|
Product |
REC-1240 |
REC-1260 |
|
Input Voltage |
23 to 30VDC |
23 to 30VDC |
|
Output Voltage Absorption/Float |
13.5V ± 1% |
13.5V ± 1% |
|
Output Voltage Bulk Charge |
14.5V ± 1% |
14.5V ± 1% |
|
Efficiency |
≥ 85% |
≥ 85% |
|
Bulk Charge Current |
40 Amps |
60 Amps |
|
Stand by Current |
20mA |
20mA |
|
Protection |
Short Circuit, Battery Reversal, Over Voltage and Thermal Protection |
|
|
Input and Charge Status Indication |
Yes |
Yes |
|
Output Connections |
Fly Leads |
Fly Leads |
|
Dimensions mm (LxWxH) |
285 x 175 x 65 mm |
285 x 175 x 65 mm |
|
Weight |
2.5Kg |
2.6Kg |
Design and specifications may change without notice.
*Discontinued* BC2412-20 24V To 12V Switchmode Battery Charger
Features Include:
• High efficiency switchmode technology
• Control wire via ignition
• Automatic 2 stage charge
• Current and Voltage limiting protection
• Compact and lightweight aluminium heatsink construction
• Output overvoltage protection
• Applicable where there are high current drain loads e.g. winches, rear lift platforms
For More Information:
• Refer to Leaflet or feel free to contact us
Installation Sheet
|
Product |
*Discontinued* BC2412-10 |
|
Input Voltage |
20V to 28VDC |
|
Output Voltage |
14V ± 3% |
|
Efficiency % @ Full Load |
≥ 90% |
|
Output Current |
10A |
|
Stand By Current (Approx) |
50mA |
|
Short Circuit Protection |
Yes |
|
Input To Output Protection |
Yes |
|
Thermal Protection |
No |
|
Output Connections |
4 Fly Leads |
|
Dimensions mm (LxWxH) |
90 x 135 x 60 mm |
|
Weight |
0.6Kg |
Design and specifications may change without notice.