Battery Chargers 12V To 12V

*NEW* NGBC1240 - 40A 12V DC to DC Voltage Booster Battery Charger joins the ranks of our new NG series  in being pint sized overacheivers. The NGBC1240 can punch above its weight and size charging at 40A. Though it is capable when the needs arise with the ability to provide up to 80A to the auxiliary battery with the use of our optional Bosst Charge setup. This option also adds our other popular feature of Automatic Start Assist.

*Discontinued* NGBC1222 - 22A 12V DC to DC Voltage Booster Battery Charger is a part of the new pint sized powerhouse of the GSL Electronics DC to DC booster charger range. Feature rich and using next generation topology producing over 10% more power in a 15-58% smaller package than its competitors. Not only that but rounded out with a weather resistant polymer encapsulation.
Available both fully optioned(NGBC1222-2) with start assist and thermal compensation or basic model(NGBC1222-1). 

*Discontinued* The MCB-1225 is designed to compensate for voltage drops commonly found when charging auxiliary battery systems in caravans from the main vehicle battery.

*Discontinued* MCB-1225L - based on the original MCB-1225, the new MCB-1225L adds two additional features to the arsenal of this powerhouse unit. Adding lithium charging and a fixed regulated output option.

*NEW* NGBC1240 - 12V DC to DC Voltage Booster Battery Charger

Features Include:

• New generation topology
• Higher current in a smaller size
• 40A from a 374cm³ package
  (32.3mm(H) x 71.5mm(W) x 162mm(L))
• Revolutionary constant output power feature. Giving you extra
   charge Amps when your Auxiliary battery is low.

• Optional automatic Boost Charge Asssist (Upto 80A) automatically connect main
   and auxiliary for extra charging assistance under certain conditions.
• Using the above option also allows for our revolutionary Jump Start Assist which will automatically connect main
   and auxiliary for emergency jumpstart on low main battery conditions.
(Solenoid sold separately)
• Automatic sensing and compensation for large voltage drops on input wires.
• Selectable chemistry via wire setup enables accurate charge voltage for
   AGM/GEL/FLOODED and Lithium batteries
• Award wining digital power technology that reduces component count with increased reliability.
• Convection cooled light weight aluminium heatsink construction combined with polymer encapsulation making the unit strong, weatherproof and able to be mounted almost anywhere.
• Unit over temperature protection will allow for safe operation
• Over current protected

NGBC1240 Instuction Manual

	Product	NGBC1240
	Lowest Operating Voltage	11V
	Maximum Operating Voltage	16V
	Maximum Current at Bulk Charge (Maximum in Boost Assist)	40A (Upto 80A)
	Charge Voltage for Flooded Cell	14.5V
	Charge Voltage for AGM / Gel	14.3V
	Charge Voltage for Lithium	14.8V
	Float Voltage for Flooded / AGM / Gel (Float for Lithium)	13.5V (13.9V)
	Output Short Circuit Protection	No
	Dimensions mm (HxWxL)	32.3mm x 71.5mm x 162mm
	Weight	560g

Design and specifications may change without notice.
 

*Discontinued* NGBC1222 - DC to DC Voltage Booster Battery Charger

Features Include:

• New generation topology
• Higher current in a smaller size
• 22A from a 374cm³ package
  (32.3mm(H) x 71.5mm(W) x 162mm(L))
• Over 10% more power and from roughly 15% to over 58% smaller in size than direct competitors. * 
• Revolutionary constant output power feature. Giving you extra
   charge Amps when your Auxiliary battery is low.
• Optional automatic solenoid bypass feature will automatically connect main
   and auxiliary for emergency jumpstart on low battery conditions.
(Solenoid sold separately)
• External temperature compensation via a LM series sensor for charging in extreme conditions. Tested down to -10°C and up to 70°C. (Functional on lead based chemistry charging only)
• Automatic sensing and compensation for large voltage drops on input wires.
• Selectable chemistry via wire setup enables accurate charge voltage for
   AGM/GEL/FLOODED and Lithium batteries
• Award wining digital power technology that reduces component count with increased reliability.
• Convection cooled light weight aluminium heatsink construction combined with polymer encapsulation making the unit strong, weatherproof and able to be mounted almost anywhere.
• Unit over temperature protection will allow for safe operation up to a ambient of 70°C. Full power operation up to 45°C Ambient with a gradual automatic power derating up to 70°C
• 6-Pin Weatherproof Socket for all controll wires
• Over current protected
• Now only NGBC1222-1
• NGBC1222-2 - End of Life - Information on NGBC1222-2 for archival purposies. No new orders can be made for this variant. 
 

*NOTE: Data taken from similar power and size products from competitors websites. Data vaild 10/10/2013.

NGBC1222 Instuction Manual

	Product	*Discontinued* NGBC1222
	Lowest Operating Voltage	11.5V
	Maximum Operating Voltage	15.5V
	Maximum Current at Bulk Charge	22A
	Charge Voltage for Flooded Cell	14.6V
	Charge Voltage for AGM	14.4V
	Charge Voltage for GEL	14.2V
	Float Voltage	13.5V
	Output Short Circuit Protection	No
	Dimensions mm (HxWxL)	32.3mm x 71.5mm x 162mm
	Weight	560g

Design and specifications may change without notice.